PA8 series

On September 19th 2018 by admin

Voltage of motor 24V DC

Maximum load 35000N

Max Static Load 60000N

Speed Range 0.9~2mm/s

Current Range 0.4~11.5Amp

Standard Stroke 100~1500mm(customizable)

Retracted Length ≥100mm(customizable)

Protection Class IP66-IP67

Other protection Anti-corrosion, UV protection

Temperature Range -45℃~+75℃

Limit switches with Limit switches

Install connector universal joint

Cable joint IP67 Withstand voltage2500V

Mechanical Life/Guarantee(Y) >20/2 (Y)

Certificate CE UL ROHS FCC TUV

Description

Typical applications

  • Machinery and equipment for forestry, construction, mining and road construction
  • Golf cart, garden car, tractor, etc.
  • Cab door, lifting platform, etc.
  • Theme park, satellite receiver, light tracing system of solar panel, etc.
  • Ships, ocean drill platform, etc.
  • Special vehicle for health sanitation, garbage compression device, etc.

Customization

Actuator customization is available for meeting your actual demand. You can tell us whatever technical requirements needed. Our engineers will customize the most suitable actuator for you. Most of JIMI branded actuators are ready to be customized. We have abundant experience in customizing special actuators, and willing to fulfill your special customization requirements.

Overload clutch

JIMI’s electric actuator adopt mechanical clutch to limit the load, which can prevent motor stall when executing. It will function when the load exceed the rated load, to protect the electric motor and the actuator from damage, and extend the lifetime.

Potential meter feedback

The potential meter provides a analog output signal for confirming the location of extension tube. It will record the location when power off.

Technical parameters

Driven unit Trapezoid screw rod
Power supply 12V/24V/36V/48V
Rated Load 12000N
Stroke length 50mm~1000mm or> Optional
Standard speed 4.5mm/s~60mm/ Optional
Maximum current 10.5A(24VDC)
Environmental temperature -40℃~65℃
Using frequency 25%(within 10 minutes)
Protection level IP66

Parameters for model selection

Parameters for selecting models for special applications

Standard installation size

Stroke: 50~300mm L=S+200mm (for stroke less than 100mm, the installation distance is 300mm)
Stroke: 300~600mm L=S+250mm
Installing hole angle in the drawing is 90° (standard)

How to select model?

Remarks:

f. Non-standard installation size b. Whether contains potential meter or other sensor
b. Whether contains non-standard connector d. Holes at two ends are of
non-standard size
e. Whether rotation installation and angle needed
f. If any above situation or other problem be found, please consult with our technical staff

Comments are closed.

ACTUATOR

ACTUATOR