JMK-DT08 series

On August 31st 2018 by admin

Features

  • Maximum thrust 700KG
  • Inner extension tube is made by stainless steel, which is more firm
  • Maximum speed reaches 37mm/s when the load is 200KG
  • Complete metal gear driving
  • Inbuilt potential meter, adjustable stroke switch
  • Meet IP65 standard, suitable for outdoor application
  • Compatible with 24V /12V electric motor
  • Working temperature range -40°C – +65°C
  • With clutch system, Overload protection
  • Maintenance-free

Description

Typical applications

  • Machinery and equipment for forestry, construction, mining and road construction
  • Golf cart, garden car, tractor, etc.
  • Cab door, lifting platform, etc.
  • Theme park, satellite receiver, light tracing system of solar panel, etc.
  • Ships, ocean drill platform, etc.
  • Special vehicle for health sanitation, garbage compression device, etc.

Customization

Actuator customization is available for meeting your actual demand. You can tell us whatever technical requirements needed. Our engineers will customize the most suitable actuator for you. Most of JIMI branded actuators are ready to be customized. We have abundant experience in customizing special actuators, and willing to fulfill your special customization requirements.

Overload clutch

JIMI’s electric actuator adopt mechanical clutch to limit the load, which can prevent motor stall when executing. It will function when the load exceed the rated load, to protect the electric motor and the actuator from damage, and extend the lifetime.

Technical parameters

Driven unit trapezoid screw rod
Power supply 24VDC
Rated Load 1000N
Stroke length Optional range 50mm~350mm
Standard speed 12mm/s~20mm/s
Maximum current 2.5A
Maximum installation Stroke S+256mm
Environmental temperature -25℃~65℃
Using frequency 10%(within 10 minutes)
Protection level IP54

Parameters for model selection

 

Standard installation size

Stroke: 50~400mm L=S+250mm
Stroke: 400~600mm L=S+300mm

Support potential meter, standard stroke switch and clutch
Installing hole angle in the drawing is 90° (standard)

Installation size of product without stroke switch:
Stroke: 50~400mm L=S+200mm
Stroke: 400~600mm L=S+250mm

Do not support potential meter and standard clutch
Installing hole angle in the drawing is 90° (standard)

 

How to select model?

Remarks:

c. Non-standard installation size b. Whether contains potential meter or other sensor
b. Whether contains non-standard connector d. Holes at two ends are of
non-standard size
e. Whether rotation installation and angle needed
f. If any above situation or other problem be found, please consult with our technical staff

 

Comments are closed.

ACTUATOR

ACTUATOR